INSTRUMENTATION LAB

Approx. Rs 14,500 / PieceGet Latest Price

• 1. Synchro Transmitter: Synchro Transmitter motor shaft with pointer rotates on 00 to 3600 marked scale while doing the experiment. 
• 2. Stator Windings Tx: S1, S2 & S3 are Synchro Transmitter Stator Windings. Vs1s2, Vs2s3 and Vs3s1 are voltages induced in stator windings are measured at these terminals by using digital multimeter.
• 3. Stator Windings Tr: S1, S2 and S3 are Synchro Receiver Stator Windings, Vs1s2, Vs2s3 and Vs3s1 are voltage induced in stator windings are measured at these terminals by using digital mutlimeter. 
• 4. Synchro Receiver: Synchro Receiver motor shaft with pointer rotates on 00 to 3600 marked scale while doing the experiment

Approx. Rs 7,000 / PieceGet Latest Price

• Degaussing and Auto Zero sync completed
• Support Manual and Automatic Zero calibration
• Powered directly by Micsig UPI interface
• Auto match Range with Micsig UPI-type oscilloscopes
• Overload flashing light indicator

• Electric vehicle transportation design
• Switching power supply design
• Experiment of electronic engineering
• Semiconductor devices design Avionics design
• Inverter/Transformer design
• Electronic ballast design
• Industrial Control / Consumer Electronics design
• Engine driven design
• Power electronics and electric drive experimental design

Approx. Rs 5,000 / PieceGet Latest Price

Approx. Rs 6,000 / PieceGet Latest Price

Approx. Rs 5,000 / PieceGet Latest Price

Approx. Rs 5,000 / PieceGet Latest Price

Features: Easy-to-Use and Accurate AC/DC Current Measurements;DC-2MHz Bandwidth,Core Jaw Diameter of 5 mm (0.2 in.)；High Accuracy with Typically Less than 1% DC Gain Error；Split-core Construction allows Easy Circuit Connection；Low Noise and DC Drift. Applications: Power supplies, semiconductor devices; inverters/converters, electronic ballasts; industrial/consumer electronics, mobile communications; motor drives, transportation systems, propagation delay measurements, etc.

Specifications:

Approx. Rs 25,000 / SetGet Latest Price

Our urge to reach the top has enabled us to come out with an exclusive assortment of Level Control Loop Trainer.

Specifications:

• Level Sensor Pressure Transmitter (HiQ-24P) / Capacitance type (ULP24C)
• Measuring Tank Acrylic tank of 30cm length (5 liters capacity)
• Water Circulation FHP pump with necessary piping (Flexible type)
• Source Tank SS Tank of capacity 20 liters (approximately)
• Control Valve 1/2” Globe Valve (Linear) 15mm Stem Travel
• Actuator Pneumatic Actuator input 3 to 15 PSI
• I to P Converter Input 4-20mA output 3-15 PSI
• PC Interface card 16 Bit ADC (8 Ch) with 12 bit DAC interfaced with PC through RS-232/ USB Port
• Power Supply 230V 50 HZ
• Pressure Gauges Bourdon Pressure Gauge
• 0 to 100 PSI -1 No., 0 to 30 PSI - 1 No
• Manual bypass Values Manual ½”Gate Valve
• Flow Measurement Rota meter (1500 LPH)
• Mounting Mounted on a Powder Coated metal frame (Approx.650 x 500 x 750. L x B x H)
• Controller PC based dedicated PID software to control the process, control Action P, PI, PID. Trend plot with on line and off line, Printing and analysis
• Accessories (Optional) - Digital Level Indicator with Retransmission output
• Air Compressor
• Personal computer with latest features

Features:

• High efficiency
• Optimal grade material
• Easy installation