ANALOG AND BREAD BOARD TRAINERS

Approx. Rs 7,500 / PieceGet Latest Price

Product BrochureProduct Details:

UNIVERSAL DIGITAL IC TRAINERFULL SYSTEM ; Model: HiQ-UDT 604A(Suitable for Digital ICs Lab)

Specifications:

All Basic Logic Gates includingAND/OR/NAND/NOR/EX-OR/NAND/NOR/4 Bit Binary Adder/Inverter - 6Nos./4-Bit-Synchronous Counter/4Bit,MagnitudeComparator/4-Bit R/L Shift Register/4-BitUP/DOWN Counter/Decade Counter/Multiplexer & De- Multiplexer/Half Adder and Full Adder/MS JK Flip Flops –4Nos. /20pin ZIF sockets -2/BCD to 7Segment Decoder /TTL Compatible De bounce lessHigh/Low Input Switch selection with LED indicator - 12Nos./TTL Compatible High/Low Output status LEDIndicator-12Nos./TTL Compatible bounce less singleshot trigger pulse +ve and –ve - lno. Each/TTL Compatible High and Low going Squarepulse 1Hz and 10Hz - lno. Each/ 7-SegmetDisplay-1No./DC Power Supply Fixed: 5V/2A-1No.
 

• Logic Gates:  2 Input AND gate
• 2 Input OR gate 
• 2 Input NAND gate
• 2 Input NOR gate
• 2 Input EX-OR Gate
• 4 Input NAND gate
• 4 Input NOR gate
• 4 Bit Binary Adder 
• Inverter
• 4 Bit Synchronous Counter, 4 Bit Magnitude Comparator, 4 Bit-R/L Shift Register.
• 4 Bit UP/DOWN Counter
• MS JK FLIP FLOPS
• TTL Compatable Debounces High/Low Switch selection with LED status indicator .
• 1 Bread Board 

Accessories Supplied:Patch cords – 1 set ; User Manual - 1

Approx. Rs 7,500 / PieceGet Latest Price

Product BrochureProduct Details:

EDC LAB TRAINER KIT- Model: BTS 301

BTS-301 made breadboard Trainer is an effective and extremely powerful Lab teaching aid for constructing any desired circuit with different components. In-built fixed and variable Power supplies of required values with overload and short circuit protection system is an added feature of this Board. Different fixed frequency Clocks have been provided to feed as inputs to the circuits built on the breadboards.

Specifications:

Power Supply DC: 0 to 30v @500mA -2

Fixed DC: 12v-0v-(-)12V@500mA

AC Source: 12v-0v-12v@ 250mA @ 50Hz

Universal Solder less Bread Board -1

DC Ammeter: 3 1⁄2 Digit ; 0-200uA/200mA

 

DC Volt meter : 3 1⁄2 Digit ; 0-20V/200V

Approx. Rs 6,500 / PieceGet Latest Price

Product BrochureProduct Details:

BBREAD BOARD TRAINERSYSTEM ; Model: BTS 303Z

Specifications:

(8) TTL High/Low Input switch selectors withLED indication –16Nos. (9) TTL High/Low Output status LED indication– 16Nos. (10) 7 Segment Display with built-in Decoder/Driver- 2Nos. (11) TTL Compatible bounce less single shottriggerPulse +Ve -1 ; & -Ve Pulse -1(12) TTL Clock selection from 1Hz, 10Hz, 100Hz(13) DC Power Supply:Fixed Power Supply : +/-5V @ 1A ;± 12V@500mASolder less Bread Board – 2Nos. (14) Speaker -1

Accessories Supplied:Patch cords – 1 set. ; 3Pin Power cord -1 ;User Manual – 1

Approx. Rs 6,500 / PieceGet Latest Price

Product BrochureProduct Details:

BREAD BOARD TRAINER SYSTEM ; Model: BTS 303F

Specifications:

(1) TTL High/Low Input switch selectors withLED indication –12Nos. (2) TTL High/Low Output status LED indication– 12Nos. (3) 7 Segment Display with built-in Decoder/Driver- 2Nos. (4)TTL Compatible bounce less single shot triggerPulse +Ve -1 ; & -Ve Pulse -1(5) TTL Clock selection from 1Hz & 10Hz(6) DC Power Supply:Fixed Power Supply : +/-5V @ 1A ;± 12V@500mA(7) Solder less Bread Board – 2Nos. (8)Speaker -1

Accessories Supplied:Patch cords – 1 set. ; 3Pin Power cord -1 ;User Manual – 1

Approx. Rs 6,500 / PieceGet Latest Price

Product BrochureProduct Details:

Features:
Frequency Clocks: 

• TTL compatible continuous fast and Slow going square wave flock selection provided for fixed frequencies of 10 Hz & 1Hz. It is useful in most of the digital circuits like counters, Flip-flops, Shift Registers and etc.

Pulser:
Single shot pulsers-manually push to ON state with debounce circuit to provide the following pulses:

• Positive Square Pulse.
• Negative Square Pulse

This is useful in most of the digital circuits like counters, Flip-Flops, Shift Registers and ect.

7-Segment Display:

• 7-Segment Display is provided on Front panel with built in Decoder/Driver circuit for direct use in applications. The name indicates seven-segment display make use of seven segments and each segment contains an LED. The seven LED’s are labeled as a to g. It is a 10 pin device.
• Apply the BCD inputs directly from logic-input indicators or from any counter circuit, the equivalent decimal value will be displayed on 7-segment.

Power supplies:

• DC regulated Fixed Power Supply provided on the Front Panel for external connections:

 

Fixed Power Supplies:

• +5V/1.25A all the digital IC’s are internally connected.

Logic Input Switches:

• De-bounced input Toggle switches with LED indicators to force to HIGH or LOW voltages for level setting. It is useful in Digital Circuits.

 

Approx. Rs 8,500 / PieceGet Latest Price

Product BrochureProduct Details:

ANALOG & DIGITAL TRAINER SYSTEM(Suitable for EDC/DIGITAL/PDC/LINEAR IC ApplicationsLab)
Model: HiQ BTS-303AD ; Make: HiQ

Specifications:

TTL High/Low Input switch selectors withLED indication –16Nos.TTL High/Low Output status LED indication – 16Nos. 7 Segment Display with built-in Decoder/Driver- 2Nos. + ve and – ve trigger pulses - 1 each. Function generator : SINE/SQUAURE/TRIANGLEFREQ: 1hz to 1MHzTTL Square clock: 1Hz to 1MHz>DC Power Supply:Variable Power Supply: 0 to 30v @500mA -2Fixed Power Supply : +/- 5V @ 1A ; +/- 12V @500mA>AC Source: 12v-0v-12v ; 250mA @ 50Hz > Speaker -1 Solderless Bread Board – 2Digital Meters DC Ammeter: 3 1⁄2 Digit ; 0-200uA/200mADC Volt meter : 3 1⁄2 Digit ; 0-20V/200V

Accessories Supplied:Patch cords – 1 set ; User Manual - 1

Approx. Rs 8,000 / PieceGet Latest Price

Product BrochureProduct Details:

BREAD BOARD TRAINERSYSTEM ; Model: BTS 303E

Specifications:

(1) TTL High/Low Input switch selectors withLED indication –12Nos. (2) TTL High/Low Output status LED indication– 12Nos. (3) 7 Segment Display with built-in Decoder/Driver- 2Nos. (4)TTL Compatible bounce less single shot triggerPulse +Ve -1 ; & -Ve Pulse -1(5) TTL Clock selection from 1Hz to 2MHz(6) DC Power Supply:DC Variable Power Supply 0 to 15V/500 mA0 to 0 (-) 15V/500mAFixed Power Supply :5V @ 1A ;± 12V@500mAAC Source: 12V-0V-@50Hz(7) Solder less Bread Board – 2Nos.

Accessories Supplied:Patch cords – 1 set. ; 3Pin Power cord -1 ;User Manual CD-1

Approx. Rs 4,500 / PieceGet Latest Price

Product Details:

To verify & test the value of basic electronic components Resistor, Capacitor, Diode, Ic,Transistor Etc.,

Approx. Rs 1,500 / PieceGet Latest Price

Product Details:

The interface modules covering wide range of applications from simple switch, lamp input/output through to more complex closed loop and open and microcontroller training systems. They are compatable with 8bit & 16but series of microprocessor and microntroller training systems. the on-board 26 pin FRC connector providing to interface with Microprocessor/Microcontroller training kits.

List of Interface Modules

• HiQ-ADC 01   8Bit ADC Interface Module
• HiQ-DAC        8Bit DAC Interface module
• HiQ-LCI          Logic controller Interface
• HiQ- TLI          Traffic Lights Interface module
• HiQ-RTC          RTC Interface module
• HiQ-DCM         DC motor Interface module
• HiQ-STM         Stepper Motor Interface module (Stepper motor controller card,12V/5V DC, 3kg-cm torque Stepper motor and Power supply included)
• Hi-Q-EI         Elevator Interface module
• HiQ-LCD      16xl line LCD display Interface module
• HiQ-KI      Keyboard Interface module
• HiQ-7SEG   7-Segment  display Interface module
• HiQ-16SEG   16-Segment display Interface module
• HiQ-DMD       8x8 DOT matrix display interface module
• HiQ-LI           Level indicator Interface module
• HiQ-ADC02     12bit, ADC Interface module
• HiQ-TEMP       Temperature Controller Interface module (Temperature controller card, Temperature simulator kit and power supply included)
• HiQ-PROG      Programmer Interface to program 87c51 & 89c51C

Approx. Rs 6,500 / PieceGet Latest Price

Product BrochureProduct Details:

Features:

• Ideal for electronics analog and digital circuit experimentation and design.

• Built-in 1MHz Sine, Square, Triangle and +ve & -v Pulse Generator.
• 5-Digit Frequency Counter
• 3-Digit-Digital CD voltmeter & ammeter
• Built-in fixed and variable power supplies
• High Quality Universal solder less Bread-board
• Bounceless TTL Switches &  LED Indicators
• TTL compatable Single shot and Continuous variable clock (1MHz)
• Variable potentiometers

• 7-Segmemt Display with decoder/driver

Approx. Rs 6,500 / PieceGet Latest Price

Product BrochureProduct Details:

Other Details:

• 7 Segment Display with built in Decoder/Driver
• +Ve & -Ve,Trigger pulse with debounce circuit 
• DC Power Supply: Variable power supply 0 to +15V;& 0 to -15V@ 500mA
• Fixed power supply +5V@mA;+or -12V@500mA
• AC Source 12V-0v-12V;250mA@ 50Hz.

Approx. Rs 8,500 / PieceGet Latest Price

Product Details:

Specification

• Logic Gates:  2 Input AND gate
• 2 Input OR gate 
• 2 Input NAND gate
• 2 Input NOR gate
• 2 Input EX-OR Gate
• 4 Input NAND gate
• 4 Input NOR gate
• 4 Bit Binary Adder 
• Inverter
• 4 Bit Synchronous Counter, 4 Bit Magnitude Comparator, 4 Bit-R/L Shift Register.
• 4 Bit UP/DOWN Counter
• MS JK FLIP FLOPS
• TTL Compatable Debounces High/Low Switch selection with LED status indicator .

Approx. Rs 5,500 / Piece1Get Latest Price

Product Details:

BREAD BOARD TRAINERSYSTEM ;Model: BTS 303H
Specifications: (1) TTL High/Low Input switch selectors with LED indication –12Nos. (2) TTL High/Low Output status LED indication – 12Nos. (3) 7 Segment Display with built-in Decoder/Driver - 2Nos. (4) TTL Compatible bounce less single shot triggerPulse +Ve -1 ; & -Ve Pulse -1 (5) DC Power Supply: DC Variable Power Supply 0 to +15V/500 mA -2nos Fixed Power Supply :+15V/300 mA + 5V/1A AC Source: 6V,12V,18V,54V/300mA @50Hz (6) Solder less Bread Board – 2Nos.

Accessories Supplied: Patch cords – 1 set. ; 3Pin Power cord -1 ; User Manual -1

Approx. Rs 8,500 / PieceGet Latest Price

Product BrochureProduct Details:

FEATURES:

• Pulser: Single shot pulser – Manually pushed to ON State with de-bounce circuit to provide the following pulses
• Frequency Clock: TTL compatible continuous Fast and Slow going Square, Triangle and Sine wave, clock selection provided for 1Hz to 1MHz.
• Speaker: 8 Ohms/0.5W miniature speakers with terminations.
• Logic Input Switches: 16 No’s De-bounced Toggle switches with LED indicators to force to HIGH or LOW voltage level setting.
• Logic Output Indicators: 16 No’s LED Indicators for monitoring logic level output status
• Bread Board: Solder less Breadboard to accept 0.3 to 0.85mm single strand wire
• 7-Segment Display: 7-Segment displays with built-in Decoder/Driver circuit: 02Nos.
• Digital DC voltmeters: 3½ digit Digital DC voltmeters ranges 0-20V & 0-2V are provided on the front panel to measure the DC voltages in the circuit constructed on bread board.
• Digital DC Micro Ammeter: 3½ digit Digital DC Micro Ammeter range 0-200mA is provided on the front panel to measure the DC Current in the circuit constructed on Bread Board.
• Digital DC Milli Ammeter: 3½ digit Digital DC Milli Ammeter range 0-200mA is provided on the front panel to measure the DC Current in the circuit constructed on Bread Board.                                                                                                         Specification
  • Logic Gates:  2 Input AND gate
  • 2 Input OR gate 
  • 2 Input NAND gate
  • 2 Input NOR gate
  • 2 Input EX-OR Gate
  • 4 Input NAND gate
  • 4 Input NOR gate
  • 4 Bit Binary Adder 
  • Inverter
  • 4 Bit Synchronous Counter, 4 Bit Magnitude Comparator, 4 Bit-R/L Shift Register.
  • 4 Bit UP/DOWN Counter
  • MS JK FLIP FLOPS
  • TTL Compatable Debounces High/Low Switch selection with LED status indicator .

Approx. Rs 8,500 / PieceGet Latest Price

Product Details:

Universal Digital IC Trainer System:

• Logic Gates:  2 Input AND gate
• 2 Input OR gate 
• 2 Input NAND gate
• 2 Input NOR gate
• 2 Input EX-OR Gate
• 4 Input NAND gate
• 4 Input NOR gate
• 4 Bit Binary Adder 
• Inverter
• 4 Bit Synchronous Counter, 4 Bit Magnitude Comparator, 4 Bit-R/L Shift Register.
• 4 Bit UP/DOWN Counter
• MS JK FLIP FLOPS
• TTL Compatable Debounces High/Low Switch selection with LED status indicator .

Approx. Rs 6,500 / PieceGet Latest Price

Product Details: