FUNCTION GENERATOR

Approx. Rs 20,000 / PieceGet Latest Price

• 3-in-1 function Generator
• Fully Microscontrolled design, minimum front panel controls 
• multi waveforms sine, square, Traingle, Sweep, pulse with duty cycle variation, TTL/CMOS etc.,
• Separate Digital Display for Frequency, 3-Digit display for amplitude 
• Highly stable, precised waveforms through frequency & amplitude
• DC offset, Cw, FM, Sweep, symmentry continously adjust.
• Built-n 8-digit, 10Mhz/50Mhz Frequency counter
• output protection
• High Reliability (MTBF>10,000H) 
• Wave Forms: Sine, Square, Triangle, Pulse with Duty CycleVariation.
• Frequency Readout : LCD with Function Display
• Output : Socket - BNC
• Amplitude - 20 V p-p with 50Ω impedance
• -LCD Display 16X1 character shows frequency and
• output waveform.
• -Sine, Square, Triangular and Pulse Wave forms.
• -Direct Digital Synthesizer IC based design with crystal
• oscillator gives exceptional frequency accuracy.
• -High frequency active filter used to get low distortion sine
• wave.
• -Wide frequency range from 1 Hz to 3 MHz with low phase
• noise and good spurious performance &
• Amplitude 20mv to 20V
• -Variable DC offset facility with ON/OFF control.
• -Output amplifier protected against short circuit and ±15V
• overload.
• -Standard 50 ohms output impedance.
• -Compact size enables space saving

Approx. Rs 20,000 / PieceGet Latest Price

• 4-in-1 function generator
• Fully microcontrolled design, minimum front panel controls 
• multi waveforms sine, square, traingle, sweep, pulse, with duty cyclevariation, AM, FM, FSK, power, single etc.,
• Separate digital display for freq. & Ampl.
• 5-Digit display for frequency, 3-digit dis[lay for amplitude
• Highly stable, precised waveforms through frequency & amplitude
• DC offset, CW, FM, Sweep, Symmentry Continously adjst.
• Built-in 8 digit,10mhz/20mhz/100mhz frequency counter output protecton
• High reliability (MTBF>10,000H)
• Wave Forms: Sine, Square, Triangle, Pulse with Duty CycleVariation.
• Frequency Readout : LCD with Function Display
• Output : Socket - BNC
• Amplitude - 20 V p-p with 50Ω impedance

Approx. Rs 35,000 / PieceGet Latest Price

• Wave Forms: Sine, Square, Triangle, Pulse with Duty CycleVariation.
• Frequency Readout : LCD with Function Display
• Output : Socket - BNC
• Amplitude - 20 V p-p with 50Ω impedance
• Frequency Range: 1Hz to 25MHz.
• Variable control between steps. 1Hz to 25 MHz for Square/pulse1Hz to 6 MHz for triangle.

Product Price :Get Latest Price

1. Expect with the conventional signal input and output functions.
2. Voltage and current have automatic output function,it can choose a single rise,three modes of single drop and cycle.

3. With input to output conversion,voltage conversion active current mode,passive mode and current conversion voltage mode.

4. The output has a custom function,the upper and lower output limits can be set arbitrarily.

6. Voltage input diagram,current input diagram,the frame rate is 10 frames.

7. PWM output can set frequency and duty cycle respectively.

8. Real-time curve:Real-time observation of changes in voltage and current

9. It is powered by a large-capacity lithium battery and is charged with a Type-c interface (5V).The capacity of the lithium battery is 3000mAh,Super long working hours

10. The high-definition TFT color LCD screen makes the reading more eye-catching.The resolution is 240 x 320.Low power consumption,Maximum power consumption: 0.32W

Approx. Rs 12,000 / PieceGet Latest Price

• Waveforms: sine,square,triangle,pulse
• Frequency Readout: 3½ digits with direct display in Hz,KHz or MHZ
• Output: socket-BNC Amplitude-20V p-p with 50Ω impedance
• Frerquency Range: 10hz to 10MHz, selected in 6 decade steps. Variable control between steps. 10Hz to 5MHz for square/pulse 10Hz to 1MHz for triangle
• Accuracy: 3%<20Hz,2%-20Hz to50Hz, 2%A-20Hzto 50Hz, 1%-100Hz to500Hz,0.1%>500Hz
• DC offset: ±5V continuously adjustable, attenuated by step attenuator
• Attenuator Switches: 0dB,20dB,40dB,60dB
• Level Flatness:±2% from 10Hz to1MHz
• Sine Wave Distortion:0.5% maximum at 20V p-p (Fo=20KHz)
• Square/Pulse Rise Fall time:30nsec at full rated output

Approx. Rs 5,000 / PieceGet Latest Price

Specifications:

• Frequency Range: 0.5 Hz to 5 MHz
• Frequency Stability: < 0.5% / hr or 0.8% / 24 hr at constant ambient temperature (medium position of frequency control)

Waveform characteristics:

• (All waveform characteristics are with 50 terminations)
• Sine wave Distortion: 0.5 Hz - 100 kHz: max. 0.5 % 0.1 MHz-0.5 MHz: max. 1.5% 0.5 MHz - 5 MHz: max. 3%
• Square Wave Rise time: typ. <30 ns
• Overshoot: < 5%
• Triangular non-linearity: <1% (up to 100 kHz)
• Trigger Output: Square Wave synchronous to signal output, TTL > 4 Vpp
• Frequency Display Accuracy: Up to 5 Hz: ± (1% + 3 D) 5 Hz - 5 MHz: ± (5 × 10-5 + 1D)
• Output: (short-circuit-proof)
• Output voltage: 10 Vp into 50 , max. 20 Vpp open circuit
• Attenuation: max. 60 dB, 2 steps: 20 dB ± 0.2 dB each Variable: 0 to 20 dB
• Amplitude flatness: (sine/triangle) 0.5 Hz - 0.5 MHz: max. 0.2 dB
• 0.5 MHz - 5 MHz: max. 0.5 dB
• Output Impedance: switchable 50 / 600
• DC Offset: Variable offset range: max. ± 2.5 V into 50 max ± 5 V open circuit

Frequency modulation:

• FM Input: connector on rear panel
• Frequency Change: 1: 100 approx.
• Input Impedance: 50 k II 25 pF
• Input Voltage: ±30 V max.
• FM Internal (Sweep): Sweep Speed: 20 ms to 4s
• Sweep Range: approx. 1: 100

Accessories:

• Manual: 1 no. BNC - BNC: 1 no. Line Chord: 1 no

 
Features:

• Frequency Range 0.5Hz to 5MHz
• Digital Frequency
• LCD Readout for frequency & mode
• Waveforms: Sine, Square, Triangle, DC
• DC-Offset Adjustment
• Trigger Output
• Internal Sweep & External FM-Modulation
• Square Wave Rise time Typ. 30ns
• Distortion Factor < 0.5% (up to 100 kHz)

Approx. Rs 4,000 / PieceGet Latest Price

Customers can avail from us a premium range of Function Waveform Generator, so we are offering this product in bulk. (Function Generator PT-52073 (10MHz DDS Function Generator)

Other information:

• Uses DDS technology, dual outputs, adjustable phase, the highest output frequency is 50MHz (SDG1050)
• 125 MSA/s sample rate, 14 bit vertical resolution, 16 Kpts memory
• Outputs 5 types of standard waveforms, 48 internally stored waveforms
• Includes built-in high precision, 200 MHz frequency counter
• Multiple modulation functions, sweep-frequency function, pulse train function
• Standard PC connections: USB Device, USB Host, support U Disk storage and software, optional GPIB port
• Can seamlessly connect to the SDS1000 series digital oscilloscopes and supports remote command control

Specification: 

Approx. Rs 30,000 / PIECEGet Latest Price

• Advanced DDS technology, 125MSa/s sampling rate, 14bit vertical resolution
• Single channel output, 5 types of standard waveforms, built-in 46 kinds of arbitrary waveforms (including DC)
• Complete modulation functions: AM, DSB-AM, FM, PM, FSK, ASK, PWM, linear/logarithmic sweep, and burst
• Innovative EasyPulse technology, can output pulses with low jitter and quick rising/falling edges
• Standard interfaces: USB Device, USB Host, support U-Disk storage
• Provides 10 nonvolatile storage spaces for user’s arbitrary waveforms
• Can be seamlessly connected to SIGLENT Digital Storage Oscilloscope
• Configurable with powerful arbitrary waveform editing software Easy Wave.

Additional Information:

Approx. Rs 18,900 / PieceGet Latest Price

Technical Specifications:

• Operating Modes: Sine, Square, Triangle and Pulse.

Frequency Range:

• 1Hz to 1MHz in six decade steps, variable control between steps:
• Accuracy : 1% of the selected range + counts

Waveforms Charecteristics:

• Sine wave Distortion : 1% typical
• Square/Pulse Rise & Fall time : <100n sec at full rated output.
• Pulse Duty cycle variation: 15% - 85% (minimum pulse with 200n sec)
• Triangle Linearity Error: 0.5% (F¿¿¿ = 100 KHz, 5%-95%)

Frequency Counter:

• Display : 5 Digits
• Frequency Range: 1Hz to 2MHz
• Input Impedance : 500Kohms / 22 PF
• Accuracy: Count ± 0.1Hz

Approx. Rs 40,000 / PieceGet Latest Price

SIGLENT’S SSG5000X RF Signal Generators can generate analog and vector signals, and have a frequency range of 9 kHz to 4 GHz/6 GHz. They feature the industry-leading performance in phase noise, spectral purity, bandwidth, EVM, output power. The internal IQ modulation generator and waveform playback function make it easy to create even the most complex signal types. SSG5000X generators also cover the most important RF band for digital wireless communications and include standard waveform files. The SIGLENT SSG5000X Signal Generators are powerful and cost effective sources that are ideal for R&D, education, and manufacturing

Features:

• Frequency up to 4 GHz/6 GHz
• 0.001 Hz frequency setting resolution
• Maximum output power up to +26 dBm (typ.)
• Phase Noise: -120 dBc/ Hz @ 1 GHz, 20 kHz offset (typ.)
• Single pulse, double pulse and pulse train generator
  (option)
• Frequency up to 4 GHz/6 GHz
• 0.001 Hz frequency setting resolution
• Maximum output power up to +26 dBm (typ.)
• Phase Noise: -120 dBc/ Hz @ 1 GHz, 20 kHz offset (typ.)
• Single pulse, double pulse and pulse train generator
  (option)

Approx. Rs 7,000 / PieceGet Latest Price

Other information:

• The new SM5062, 3 MHz function generator, state of the are designed on latest embedded & SMD technology. Precise settings of signal frequency, amplitude, and duty cycle made it possible to have full control over test signal input to your testing needs. High stability of signal frequency 0.1%/hr, ensures no need to check & recheck the deviation in signal fed to your system. The pulse generator settings are fully controllable, ensuring correct frequency & pulse width, enhance the testing. Internal sweep function can be clubbed to any of the waveform shape, has full control over star t, stop frequencies and sweep duration
• The remote programmability of complete front panel of SM5062 from PC makes its unique identity in its class of Function Generators. The standard software can control its parameters display on monitors. User can write/code their own programs for applications.
• Front panel of SM5062 is straight forward and user friendly, all the parameters adjusted are numerically displayed, leaves no errors in test set up. All these controls and functions make SM5062, a unique instrument in its class, gives best price to performance ratio

Applications:

• Design & developments, educational laboratory experiments, repairs and service, industrial testing, power electronics assembly testing, electronic manufacturing industries etc

Features:
Three functions in one instrument:

• Function Generator
• Sweep Generator
• Frequency Counter
• Wave Shapes: Sine, Square, Triangular, Pulse, Ramp, and DC
• Frequency, Duty Cycle, Amplitude, Sweep Time etc, setting displayed on LCD
• 40 MHz external Frequency Counter
• External Modulation: AM (standard, balanced), FM, PWM, PAM
• 600 Ω synchronous outputs
• All the parameters can be remotely controlled via RS232 interface
• Save/ Load 10 setups

Product Price :Get Latest Price

• Dual-channel, 120MHz maximum bandwidth, 20Vpp maximum output amplitude, high fidelity output with 80dB dynamic range
• High-performance sampling system with 1.2GSa/s sampling rate and 16-bit vertical resolution. No detail in your waveforms will be lost
• Innovative TrueArb technology, based on a point-by-point architecture, supports any 8pts~8Mpts Arb waveform with a sampling rate
• in range of 1μSa/s~75MSa/s
• Innovative EasyPulse technology, capable of generating lower jitter Square or Pulse waveforms, brings a wide range and extremely
• high precision in pulse width and rise/fall times adjustment
• Plenty of analog and digital modulation types: AM, DSB-AM, FM, PM, PSK, FSK, ASK and PWM
• Sweep and Burst function, Harmonics mode supported
• High precision Frequency Counter
• Standard interfaces: USB Device, USB Host, LAN???VXI-11, support U Disk storage and software, upgrading GPIB port is optional
• 4.3” touch screen display for easier operation